Application - 激光雕刻

雕刻是最常见的激光打标应用,雕刻时激光束磨蚀材料从而雕刻出标志,在整个过程中,激光器就像凿子,吹走选定区域的主题材料。

激光雕刻机是我们的 redENERGY 光纤激光器的主要功能;能够进行精细雕刻和深度雕刻,并且我们的激光器可以用于雕刻所有金属和工业陶瓷。

‘应用文章' 是关于特定应用的详细文章。
‘应用实例' 是对特定应用的简短见解,旨在在短短的几分钟内快速了解该应用。

Filter by Material:
Filter by Product:

Brass Engraving

Application Postcard
Posted on 15/05/2017

Brass is a metal alloy of copper and zinc. The material properties of brass include; low melting point, high conductivity, and being highly malleable. These properties can vary depending on the specific alloy of brass being used. Brass alloys can... read more >

Laser engraving on jewellery

Engraving Metal with a Laser

Application Insight
Posted on 13/04/2017

While laser cutting and laser engraving are two separate laser processes, they have many similarities, and so a single cutting laser setup can also be used to laser engrave materials too. Laser engraving In the article below we explore laser... read more >

TBC Removal from Super Alloys

Application Postcard
Posted on 02/11/2016

Thermal Barrier Coats (TBC's) are used in aero engineering and gas turbine manufacturing to extend the lifetime of components. TBC's are also becoming more commonly used in the automotive industry to reduce heat loss from engine exhaust systems.... read more >

Stainless Steel Engraving with 500ns pulses

Application Postcard
Posted on 29/10/2015

Our redENERGY EP-Z Laser benefits from having longer duration pulses which can have significant benefits in engraving applications.For this application WF 39 which is a 500ns pulse (full width) was used to achieve 0.2mm depth on this logo in a... read more >

Silver Engraving Options

Application Postcard
Posted on 29/10/2015

Our range of redENERGY Pulsed Fiber Lasers can be used to mark a variety of etching textures and oxide colours on to Sterling Silver Jewellery.  This mark is possible over a large focal range with a working distance of over 1mm.The butterfly... read more >

Engraving with a Pulsed Fiber Laser

Application Insight
Posted on 29/10/2015

Engraving is the most common of all Laser marking applications, the engraving process is produced by the Laser beam removing material to create a mark, where the Laser acts like a chisel and blows away selected areas of the subject material.This... read more >

Engraving Tool Steel

Application Postcard
Posted on 29/10/2015

Our range of redENERGY Pulsed Fiber Lasers are ideally suited for a range of engraving applications. For fine engraving the high beam quality of the 20W SM Laser gives finest control and beam quality. However, for applications where width of mark... read more >

Engraving of Stainless Steel

Application Postcard
Posted on 29/10/2015

The introduction of our redENERGY EP Laser series with its ability to deliver longer pulses has proved to be ideally suited to high quality deep engraving of stainless steel.Experimental studies have shown that material removal rates can be... read more >

Engraving Of Aluminium Alloys With Pulsed Fiber Lasers

Application Insight
Posted on 14/10/2015

Laser engraving and Laser milling have become widely established commercial activities and have been applied to many different types of metals. As a non contact process, Laser micro-machining offers many advantages over conventional mechanical... read more >

Deep Engraving of Stainless Steel

Application Postcard
Posted on 14/10/2015

The image shown is a 3x3mm square area which has been processed to a depth of 1.5mm in 92 seconds, representing a removal rate of 9mm3/min.This high quality result has been achieved through the use of waveforms to maintain control of the... read more >

Etching Silver on Ceramic

Application Postcard
Posted on 14/10/2015

Our range of redENERGY Pulsed Fiber Lasers can be used to isolate thick bright metal plating on top of ceramic. This allows users to quickly and cleanly create islands of electrical isolation which can then be used as substrates for electronic... read more >

Pewter Cutting, Engraving and Marking

Application Postcard
Posted on 13/10/2015

To commemorate our participation in the 2013 Munich Laser World of Photonics we produced a special pewter ‘tankard’ pendent.Pewter is a malleable metal alloy primarily made of tin with low levels of alloying elements. It has a very low... read more >