使用组合的特殊机器 — 通常是指打印机 — 和计算机软件，这样可以产生复杂的形状。激光器将墨盒固定的材料加热，然后将超细层置于一个横截面。从下到上逐步组装该横截面，软件指示打印机何时在何地放下材料。
3D printing is being used to produce components across many medical disciplines since it offers various benefits when compared with standard manufacturing techniques.
Treating people with spinal disorders using this method is becoming more... read more >
In recent years, fiber lasers have revolutionised many industries, in what some are calling the second industrial revolution. Here we explore how additive manufacturing (often also interchangeably called 3D printing) is benefitting the world of... read more >
What is selective laser sintering 3D printing and what is it used for? These are questions we have been asked in the past. We have, therefore, created this question and answer guide on the topic, which we hope you find... read more >
Jewellers around the world are increasingly aware of the benefits of fiber lasers in jewellery manufacturing. Of particular benefit are rapid prototyping and small-batch manufacturing, which we now go on to... read more >
... read more >
A recent article in the online veterinary blog summed up developments in 3D printing for vets quite nicely, with the article entitled “3d printing is changing surgery”. Of course, this is true, we now discuss advances in this technology in our... read more >
When we think of how lasers play a role in the jewellery industry, we typically think of them being used to clean the jewellery or to engrave and mark it. However, another process which is gaining in popularity in this sector is additive... read more >
Laser metal deposition (LMD) is an additive production process that uses a laser beam to form a pool of melted metal (a melt pool) on the surface of a metallic substrate into which metal powder is injected using a gas stream. The absorbed metal... read more >
Laser metal fusion, also known as selective laser melting or powder bed fusion, is an additive manufacturing process. It is effectively a 3D printing technology that builds components from a powder bed by selectively melting the powder and fusing... read more >
Additive manufacturing, which is the process by which a material is added layer by layer to produce a 3D part or component, has been dubbed the next ‘industrial revolution’ in the manufacturing industry. Here we examine why there is the need for... read more >
Although additive manufacturing isn’t a new technology, the recent expansion and developments have meant that it’s hit the limelight more recently, with the possibilities for 3D printing uses seemingly wide open.
Being able to “print”... read more >
The technology to use additive manufacturing has been around for more than three decades, but it’s only quite recently that it’s been possible to explore this in more depths.
A number of different industries have benefitted from this... read more >
The very latest technologies are bringing massive cost and lead time benefits to prototyping. Infact very few technologies have offered as much as 3D rapid prototyping technology (RPT) has in the last 5... read more >
3D printing, Rapid Prototyping and Additive Manufacturing are all terms used to broadly describe the same processes, which involve the creation of complex structures and components by the layering of materials which are gradually built up.
A... read more >
Additive manufacturing is one of the most exciting technologies to be unveiled in recent years, with the possibilities for both consumers and in industry almost limitless.
At the very core of this are 3D printing machines, with the... read more >
Additive manufacturing processes are gradually increasing in their practical application, and engineers are starting to figure out where, when and how they could be the most useful.
Rather than looking to completely replace all conventional... read more >
3D printing, or additive manufacturing to use an alternative term, is a type of technology which has been around for a surprising amount of time – the 1970’s infact. In the past 10-15 years, the technology has started to evolve more rapidly... read more >
There are many different additive processes, each of which has its own different purpose. We get asked about these processes fairly often, so have listed them in this Q&A guide.
The surge in popularity of additive manufacturing
One of the most... read more >
3D printing is a technology which has captured the headlines, with stories about the increasingly sophisticated projects that can be built. Although it may seem relatively new, the technology has been around for some time having first emerged... read more >
Although additive manufacturing is an exciting technology for many fields, the aerospace industry is seen as one of the key growth areas.
The ability to create complex shapes within one mould, with intricate internal dimensions and complex... read more >
Rapid Prototyping is one of the processes that are grouped under the general heading of Additive Manufacturing. Other processes available under this heading are ‘Layer manufacturing’ or ‘Solid freeform fabrication’ (SFF) processes. This... read more >