汽车业

光纤激光器在汽车行业的多个领域发挥着重要的作用,与常规加工方法相比,光纤激光器拥有很多有点。

凭借其在应用领域的突出表现,例如激光切割、激光焊接、激光打标等等,光纤激光器是创新型制造行业的理想选择。如何在汽车行业内使用光纤激光器的点型例子就是在整辆车的按钮上采用全天候塑料打标,这样按钮就可以在夜晚发光。

Heating is conventionally induced by a furnace, flame, arc or induction coil. In contrast, the Laser beam is focused or shaped into a suitable pattern and scanned over the component. The high energy density Laser beam heats the surface much more... read more >

Engine, transmission and drive train components must be extremely robust yet as small and lightweight as possible. To get the most from these components they need proper lubrication and fluid flow properties. Holes around 0.5mm diameter in iron... read more >

According to IBIS World, a total of 86 million cars were produced globally in 2013, which leaves an enormous amount of possibilities for the application of automotive additive manufacturing.Additive manufacturing has already been used in the... read more >

We all know how important it is to be eco-friendly, which is why more of us are taking action and opting for electric vehicles. These cars are powered by lithium ion batteries which are smaller and lighter than traditional vehicle batteries.... read more >

Laser Scribing for Chip Control

Posted on 06/11/2015

Conventional turning operations are commonly used in the production of round parts, particularly in the automotive industry. Cutting tools remove material by creating a chip that in theory, is rather short so it falls to the bottom of the... read more >

Hydroform & Body Cutting

Posted on 06/11/2015

Hydroform tubes are used for high strength and high stiffness, as well as convoluted shapes for truck frames, engine cradles, radiator supports, instrument panel beams, and other components. Some holes can be pierced in the Hydroform die, however... read more >

Welding Fuel Injectors

Posted on 06/11/2015

Fuel injectors are extremely precise devices that require controlled hermetic welds to ensure their operation and safety.Excessive heat or distortion can produce fuel delivery rate or spray pattern anomalies that result in scrap. Distortion can... read more >

Con-rod Scribing

Posted on 06/11/2015

Engine connecting rods must be lightweight, strong and have very high tolerances at the crank bearing for long life. Originally, the crank bearing opening on the forged rod was machined separately and measured so a suitable 'mate' could be found to... read more >

Wire Stripping

Posted on 06/11/2015

Our pulsed Fiber Lasers can be used in CW mode to strip cables, mainly enamel off copper wires for an automatic magnet wire stripping system for the Automotive Industry, incorporating four... read more >

Welding Air Bag Initiators

Posted on 27/02/2015

Laser welding live initiators calls for excellent Laser control and the most robust fiber optic delivery systems on the market. Hermetic welds in these thin wall devices are critical to their operation and lifetime.Maintaining the proper weld... read more >