What are the advantages?
Advantages include lower heat input meaning lower distortion and smaller heat affected zones, higher welding speeds which lead to improved production rates and single-side access to the joint area, coupled with fiber optic beam delivery providing easier automation.
In the case of thick section stainless steel welding, the power provided to the focused spot on the material surface is of sufficient intensity (1×10-6 W/cm²) to form a keyhole into the workpiece, this keyhole creates a meltpool that can be manipulated along the weld joint, allowing the material to be welded in a single pass, without the need for any filler wire.
Welding with our redPOWER 4.5kW QUBE fiber laser
The example photos show a 6mm stainless steel (316) butt weld using our redPOWER 4.5kW QUBE fiber laser. An inert gas (Argon) shield was used to help maintain a full penetration, repeatable, defect-free joint. The top surface of the weld is consistent, clean and smooth meaning there is no need for any secondary cleaning process.
What are the weld requirements?
Weld requirements such as top bead width, weld interface width, penetration depth and welding speed can all be modified to suit the application by correct selection of the appropriate optical configuration and laser process parameters.
Contacting SPI Lasers
Laser beam welding of thick stainless steel is just one of the many applications of our fiber lasers range. Discuss their capabilities when you call us on +44 (0)1489 779 696 or when you complete our contact form. Receive regular updates about SPI and the laser industry when you subscribe at this link – https://www.spilasers.com/register-for-more-information.
If you enjoyed reading this article, why not register for future articles?