Linkedin Youku WeChat Weibo

Sorry, your browser is not compatible with some of the content on this website. Please update to a newer browser to view this website.

redPOWER Small Banner

Pewter, Cutting, Engraving and Marking

redENERGY G4 100W EP-Z

Pewter is a malleable metal alloy primarily made of tin with low levels of alloying elements. It has a very low melting point of circa 200°C which makes it challenging to process.

LaserPower DemandBeam ØScanner/LensEnergy
 redENERGY G4 30W HS-S 30W <1.3 8mm10mm/163mm F- thetaVarious waveforms up to 0.7mJ

To commemorate our participation in the 2013 Munich Laser World of Photonics we produced a special pewter ‘tankard’ pendent.

Pewter is a malleable metal alloy primarily made of tin with low levels of alloying elements. It has a very low melting point of circa 200°C which makes it challenging to process.

The 25mm pendent took 28sec to produce including the cutting out of all the apertures and external profile, all of the texturing and engraving and marking. A range of different parameters and WF settings were required to achieve this result. The fine character marking was especially challenging as control of heat input was critical to achieving legible text.

To download this Applications Postcard as a PDF click here!

Share article on...

注册更新

If you enjoyed reading this article, why not register for future articles?

arrow
CONTACT ME CONTACT ME