Artwork Restoration with Fiber Lasers

Fiber lasers can be used to remove a wide-variety of contaminants and particles from any material, this is especially applicable to artwork. Using ablation and cleaning techniques, fiber lasers are an excellent tool for the restoration of artwork.

Share article on...
Before and after a painting restoration

Why do artworks need cleaning?

Artworks will over time naturally become discoloured and may look dusty – people may comment they have lost their lustre/splendour.

Artworks are vulnerable to pollutants and contaminants such as body oils (if touched by fingers especially), candle smoke (especially in religious buildings), dirt, dust, smoking pollutants (nicotine, soot and smoke damage) and traffic grime (if exposed to traffic fumes) as well as others too.

Artwork may also have been subject to a range of environmental factors such as extremes of heat (e.g. cold and hot (including fire damage)), humidity and light (particularly sunlight glare).

In addition, the protective varnish applied to many paintings will naturally degrade and be subject to polymerization and photo-oxidation, this results in a dark and hard film layer.

What type of artworks can fiber lasers clean?

Artwork covers a multitude of items. For the purposes of this article we primarily intend to include ceramics, collages, drawings, interior design pieces (e.g. ornaments, vases, etc.), paintings, prints, sculptures and many other artwork pieces too. Fiber lasers can assist with the cleaning of all of these artworks.

The fiber laser cleaning process

Essentially fiber lasers clean artwork through ablation, this is a highly selective and definable process where the surface contamination is ablated off the surface, in doing so restoring the artwork to its former glory.

The fiber laser artwork restorer will use a wavelength that targets the surface layer only and not the layers underneath (i.e. the artwork itself). This means the surface contaminants (through laser heat) are ablated off. Each laser pulse can be targeted to remove a minimal thickness of material at a time.

Advantages of artwork restoration with fiber lasers

There are many advantages of artwork restoration with fiber lasers. We have already covered some of these earlier, but summarise the various advantages below:

  • Chemical free – the laser restoration process is chemical-free. Chemical cleaning is fraught with risk and includes toxicity, corrosiveness and discolouration to art pieces. Chemicals can permanently damage an artwork, considerably reducing its value
  • Precision and control – as with all fiber laser processes, ultimate precision and control is a major benefit. This is particularly important with art restoration where intricacy and care are all-important
  • Speed – the whole process is very fast, artworks can be restored very quickly compared to traditional methods
  • Targeted areas – related to the precision and control is a benefit that specific areas of the artwork can be targeted easily, even down to sizes below what the human eye can see

Related reading

The following 2 articles are also closely related to this topic:

Get in touch SPI Lasers to buy the perfect laser

We are a global laser manufacturer operating in over 150 countries across the world. As well as supporting the art industry our lasers can also be used in other industries such as automotive, aerospace, electronics, jewellery and many more.

As well as supporting typical artwork restoration processes, which are ablation and cleaning, our lasers can also be used for a variety of other purposes including additive manufacturing, cutting, drilling, engraving, marking and welding.

Visit our contact us page and complete our contact form or call us using the phone numbers published on this page for your local area.

注册更新

If you enjoyed reading this article, why not register for future articles?

arrow