Fiber Lasers Videos

See our Fiber Lasers in action; from Laser Cutting to Deep Engraving our suite of videos give an excellent insight into the versatility of both our redENERGY (pulsed) and redPOWER (CW) Fiber Lasers.

We are continually adding to our video suite so be sure to register to receive alerts when new videos are added.

Filter by Material:
Filter by Product:

Pulsed MOPA lasers really show their versatility in the area of surface processing of materials. This can tahe the form of basic cleaning to more sophisticated surface functionalisation. In these types of applications the beam quality and the... read more >

E-mobility is arguably the key current global technology focus! The drive to move away from fossil fuel engines to electric motors to reduce carbon emissions is on everyone’s agenda. The challenges are great both from a technology and a... read more >

This video introduces variMODE, a new CW product feature designed to overcome the limitations of previous lasers, giving a more flexible approach to laser processing. variMODE allows you to tailor your Fiber Laser system to optimize the beam... read more >

Recorded in October 2019 this webinar was delivered by CW Product Manager, Dr Mark Richmond and introduces variMODE, a new feature designed to overcome the limitations of previous lasers, giving a more flexible approach to laser processing. Using a... read more >

variMODE: Brass cutting comparison

variMODE: Brass cutting comparison

Posted on 09/10/2019

variMODE is a new feature designed to overcome the limitations of previous lasers, giving a more flexible approach to laser processing. Using a novel, all-in-fiber technique the output beam quality and mode profile can be selected in real time to... read more >

The recent introduction on high power single mode fiber lasers has opened up the capabilities of oscillation welding to a point where it can be competitive with high power multimode welding. The greater control of weld profile and heat input can... read more >

ns Pulsed Welding Webinar

ns Pulsed Welding – Webinar

Posted on 15/05/2019

Pulsed ns lasers are best known for marking, engraving and other ablative processes. Their use for metal joining is relatively new and opens up new possibilities through the unique control of heat input offered by these laser sources. Their low... read more >

SPI Lasers' latest exhibition showpiece breaks all the moulds by incorporating multiple laser application processes in its build, including laser cutting, marking, engraving, deep engraving, cleaning, colour marking and metal 3D printing to create... read more >

The base plate of SPI Lasers' latest big Ben exhibition showpiece includes their logo engraved in pride of place in the base plate. To achieve the required finish the plate was laser engraved and then cleaned with a few passes from a pulsed fiber... read more >

SPI Lasers' latest exhibition showpiece is Big Ben, a number of sets of clock hands were required to complete the piece, here you can see them being cut by a pulsed fiber... read more >

SPI Lasers Big Ben model consists of various types of application, this top section shows how a pulsed fiber laser can make precise white marks in a billet of black anodised... read more >

The top section of SPI Lasers' Big Ben exhibition model was created by 3D printing the part out of metal powder, resulting the amazing finished piece you see... read more >

CW fiber laser cutting of copper, to make up the tower section of SPI Lasers' Big Ben exhibition... read more >

Fiber laser cutting of 2mm mild steel to make up the tower element of SPI Lasers' Big Ben exhibition... read more >

Brass colour marking and engraving; carried out by an SPI Lasers Pulsed fiber laser to complete their Big Ben exhibition... read more >

Fiber laser cutting of 4mm steel plate for the base of SPI Lasers' Big Ben exhibition... read more >

Fiber laser cutting of 3mm brass to make up the tower components of the SPI Lasers Big Ben... read more >

Laser drilling is a growing application area and fiber lasers are often found to be the laser of choice due to their versatility. This webinar delivered by Dr Jack Gabzdyl covers the following areas: • Why use fiber lasers for drilling •... read more >

Seasons Greetings from SPI Lasers!

Seasons Greetings from SPI Lasers!

Posted on 12/12/2018

Why send a Christmas card when you have a Fiber Laser and some Brass?! This piece was laser cut with our redPOWER QUBE 1.5kW and then laser marked with our redENERGY G4 20W EP-Z. From all of us at SPI Lasers we would like to wish you a Merry... read more >

Surprised?! Hopefully that's the first of many you will get this Christmas! Watch both our Pulsed and CW Fiber Lasers in action producing our latest Christmas video. See the redPOWER 3kW QUBE/ PRISM cut the festive show piece, then watch as the... read more >

fiber laser cutting

redENERGY G4 Cleaning Rust Removal

Posted on 30/11/2017

Our redENERGY G4 Pulsed Fiber Laser is able to perfectly remove rust from any weathered surface. Perfectly preparing the material for a welding... read more >

Our redENERGY G4 EP-Z 20W Pulsed Fiber Laser is able to work at incredibly micro levels, which has benefits for so many applications and industries around the world. In this specific video, you will see our versatile pulsed laser is micro drilling... read more >

Another key laser process that finds multiple uses around the globe is laser engraving. In this video, you will see our redENERGY G4 Pulsed Fiber Laser deep engraving several aluminium alloys to create a range of different engravings and markings on... read more >

See our redPOWER 500W CW Fiber Laser cutting 0.5mm Stainless Steel into our 'Year of the Rooster' samples used at the recent LWoP Shanghai... read more >

Watch our redPOWER 3kW PRISM cutting 3mm Brass and 3mm Stainless Steel for our brand new eagle... read more >

Watch our redENERGY G4 Pulsed Fiber Laser cutting and marking 0.3mm... read more >

Watch our redENERGY G4 Pulsed Fiber Laser welding Brass to Stainless... read more >

Watch our redENERGY G4 Pulsed Fiber Laser Spot Welding 0.3mm Stainless Steel to 1.5mm Stainless... read more >

Watch our redENERGY G4 Pulsed Fiber Laser Spot Welding 0.3mm Stainless Steel to 0.9mm... read more >

Watch our redENERGY G4 Pulsed Fiber Laser Spot Welding 0.3mm Copper to 1.5mm Stainless... read more >

Watch our redENERGY G4 Pulsed Fiber Laser Spot Welding 0.3mm Aluminium to 1.5mm Stainless... read more >

Watch our redENERGY G4 Pulsed Fiber Laser cutting and marking Copper at 0.3mm and... read more >

Watch our redENERGY G4 Fiber Laser cleaning 20mm Mild... read more >

Watch our redENERGY G4 100W cleaning 20mm Mild... read more >

[embed]https://www.youtube.com/watch?v=a2e-ejkdi4o[/embed] Watch our redENERGY G4 Fiber Laser clean 20mm Mild... read more >

Watch our redPOWER QUBE / PRISM 1.5kW cutting 0.5mm Stainless Steel for our Christmas... read more >

Watch our redPOWER PRISM 1.5kW Fiber Laser cutting 5mm Stainless Steel. Produced for The Optoelectronics Research Centre, University of... read more >

Watch our redPOWER PRISM 3kW cutting 20mm Mild... read more >

Watch our redPOWER 1.5kW PRISM cutting 1mm Stainless... read more >

Watch our redPOWER 1.5kW PRISM cutting 1mm... read more >

See how our redPOWER PRISM 1.5kW CW Fiber Laser can cut 10mm Mild Steel.... read more >

Watch our new redPOWER PRISM 1.5kW cutting 1mm... read more >

The use of conventional CW and Long Pulsed Laser for welding is well known, but the use of ns Pulsed Lasers represents a new direction offering both commercial and technical benefits. More commonly used for marking and engraving the use of these... read more >

See how our redPOWER 3KW CW Fiber Laser can cut 10mm and 15mm Pickled Mild Steel.... read more >

Tower Bridge Sample

Tower Bridge Stop Motion

Posted on 05/05/2016

Using our redPOWER 3kW CW Fiber Laser to cut intricate patterns, see how versatile this Laser is in Cutting various bright metals. Our Tower Bridge is made from a variety of bright metals ranging from 1mm Brass and Copper up to 10mm Stainless Steel.... read more >

Solar Cell Cutting Fiber Laser

Solar Cell Cutting

Posted on 05/05/2016

Watch our redENERGY G4 20W EP-Z Pulsed Fiber Laser cut quickly and cleanly through Solar Cells.... read more >

See how our second festive snowflake bauble was made using our redPOWER 3kW CW Fiber Laser to Cut 2mm Stainless Steel.... read more >

See how our 2015 Christmas Bauble was created using our redENERGY G4 20W EP-Z Pulsed Fiber Laser to Cut and Colour Mark 0.9mm Brass.... read more >

Get a brief understanding about who we are and the manufacturing solutions we can offer... read more >

Steel Cutting Sample Fiber Laser

redPOWER R4 2mm Steel Cutting

Posted on 05/05/2016

Watch our redPOWER 200W CW Fiber Lasers ability to cut 2mm Mild... read more >

Image 3: Jewellery Industry – Silver Lilly

redENERGY G4 Silver Lilly

Posted on 05/05/2016

Watch our redENERGY G4 70W RM-Z Pulsed Fiber Laser Cut, Engrave, Mark and Etch our pretty 0.9mm Sterling Silver Lilly.....versatililty comes as standard!... read more >

Using our redENERGY G4 70W RM-Z Pulsed Fiber Laser we Engraved our company logo on Stainless Steel with ease.... read more >

See how our SPI engraved Ceramic Tiles were created with our redENERGY G4 20W EP-Z Pulsed Fiber... read more >

Best in Show!! Watch our redENERGY 30W S-Type Pulsed Fiber Laser Cut and Colour Mark our Best in Show sample.... read more >

Titanium Weld Fiber Laser

redPOWER R4 Titanium Welding

Posted on 05/05/2016

See our redPOWER 200W R4 CW Fiber Laser Fillet and Edge Weld Gr. 2 Titanium.... read more >

2mm Stainless Steel deep penetration overlapping Spot Welding achieved with our redPOWER 200W R4 CW Fiber Laser.... read more >

304 Tube Welding performed with our redPOWER 200W R4 CW Fiber... read more >

Using our redPOWER 400W R4 CW Fiber Laser, watch how it can cut 0.5mm Stainless Steel to create an intricate flower design.... read more >

Brass CW Fiber Laser Cutting Sample

redPOWER OEM Cutting 0.9mm Brass

Posted on 05/05/2016

See how our redPOWER 1kW OEM Fiber Laser can cut 0.9mm Brass.... read more >

Watch our redPOWER 1kW OEM Fiber Laser cut through 5mm Mild Steel.... read more >

Using a redPOWER R4 500W CW Fiber Laser to cut 1mm Stainless... read more >

Watch our redENERGY G4 70W EP-Z Pulsed Fiber Laser cut and engrave 0.5mm Brass.... read more >

QR Code Marking Fiber Lasers

QR Code Marking on Stainless Steel

Posted on 05/05/2016

A series of marks were created in this application; a black, white and combined mark. See how our redENERGY G4 20W RM-Z Fiber Laser can mark all 3 QR codes on polished Stainless Steel.... read more >

Versatility Comes As Standard SPI Lasers Pulsed Fiber Lasers

Versatility Comes as Standard

Posted on 05/05/2016

Our redENERGY G4 Pulsed Fiber Laser shows off it’s versatility by engraving and Black & White Marking on Stainless Steel pen... read more >

SPI Lasers Logo

SPI Lasers Corporate Video

Posted on 02/03/2016

Get an inside look at SPI Lasers, what we do, who we are and how we can help your company improve its manufacturing output. Our Corporate Video gives an insight into why we are one of the worlds leading providers of Premium quality Fiber Lasers;... read more >

Did you know that many different materials could be used in rapid prototyping including food, metal powder, paper, plastic, polymers and wax? Find out more interesting facts about rapid prototyping and its benefit to different industries by viewing... read more >

Additive manufacturing is the process of producing a wide range of physical objects from a 3D file. Another name for additive manufacturing is 3D printing. This technology has the potential to completely revolutionise the industrial landscape. Find... read more >

Using our redPOWER 1kW OEM CW Fiber Laser to do the cutting, see how versatile our Lasers are in Cutting Bright Metals. Our dragon is made from Bright‘ metals including 1mm, 2mm & 3mm Copper, Brass and Aluminium sections along with 3mm –... read more >

Chinese-New-Year Video

Happy Chinese New Year!!

Posted on 23/09/2015

We are celebrating the Chinese New Year in Shanghai at the Laser World of Photonics, and to mark the occasion, and the fact its the Year of the Goat, we have made some intricate ‘lucky’ envelopes to give away to visitors to our stand.  Made... read more >

Watch our redENERGY G4 50W EP-Z Pulsed Fiber Laser Cutting and Marking 0.5mm Red Anodized Aluminium. Related Product redENERGY... read more >

Deep Engraving Video

Deep Engraving with a Fiber Laser

Posted on 23/09/2015

See how an Aluminium billet can be precision deep engraved with a redENERGY G4 Pulsed Fiber Laser.  Created by C4 Precision Engraving. Related Product redENERGY... read more >