Sorry, your browser is not compatible with some of the content on this website. Please update to a newer browser to view this website.
3D printing, or additive manufacturing to use an alternative term, is a type of technology which has been around for a surprising amount of time, but has only recently started to evolve and develop sufficiently to grab the imagination of the public
Diagram of the selective laser melting (laser sintering) process
Additive manufacturing describes a certain style, where materials are added to create the finished product, rather than removed such as in subtractive manufacturing (milling or turning for example). The process provides an incredibly cost-effective and efficient means of producing the finished item and provides a far greater range of possibilities because of the flexibility of the process.
There are different ways to carry out additive manufacturing but one of the most popular is a method known as selective laser sintering or melting.
Our 500W redPOWER laser is perfect for laser sintering.
To create a product with a Laser sintering machine, the design first needs to be generated using CAD software which provides a 3D image ready for use. The file must first be converted into an .stl format as this the type of file which can be read and interpreted by the selective Laser sintering machine. The design is then sliced into superfine chunks horizontally before the Laser sintering rolls into action. A chamber on the metal laser sintering 3D printer is filled with powder; this is the material which will ultimately create the product.
The direct metal laser sintering process is controlled by a computer which instructs the laser what shape to ‘print’, moving across the powder to trace a cross-section of the product. This Laser pulses to heat up the metal powder, either to just below melting point – this is known as metal Laser sintering, or just above melting point which is known as selective Laser melting.
This metal sintering or melting process fuses the powder together and creates a solid form. Once this first layer has been established, the printer platform drops, typically by no more than 0.1mm to expose a new layer of powder and the whole process of first tracing, then heating begins again.
These superfine layers are painstakingly created one at a time during the whole selective Laser sintering process until the shape is fully formed. Depending on the size and the complexity of its geometrics, the process can take many hours or possibly even days. Although this may sound like a long time, by comparison it’s extremely quick and is one of the single biggest advantages of Laser metal sintering.
The whole process is considered to be remarkably cost effective because any powder which isn’t needed can simply be re-used so there’s no waste. Compare this to conventional machine manufacturing where up to 90% of the original materials can end up being thrown away, and it’s easy to see why direct metal Laser sintering is rapidly becoming so sought after.
The laser sintering 3D printing process works very well and the results are of a very high quality, and don’t require tooling or further processing. So why consider using a process of melting instead?
Whether you use a direct laser sintering or melting process, the same equipment is required. However, there may be some small differences in the Laser sintering metal powder. If you are opting to use the Laser to melt the powder rather than just perform 3D metal sintering, you will need a purer substance rather than an alloy. This is because there may be different melting points in an alloy, which could render the process difficult or make the results less stable. Because sintering doesn’t melt the powder completely, an alloy of different powders may be used in the Laser sintering 3D printing process. That’s not to say pure metals can’t be sintered rather than melted because they can; some which have a particularly high melting point such as tungsten would be better suited to this.
3D printing Laser sintering never actually consolidates the material; instead, the Laser simply allows the particles to merge. There is a subtle but distinct difference. Unlike the direct metal Laser sintering process, melting actually creates a pool where the materials can consolidate before reforming and hardening to create a new solid structure.
One of the reasons melting may be chosen over 3D printing Laser sintering is that the final substance won’t be porous, thereby making it more suitable for a greater range of applications. If having a porous material doesn’t affect the required function for your part, direct Laser sintering will give you the results you want too.
There are various acronyms and names used for the process of using a direct metal laser sintering 3D printer, and these can be somewhat confusing. In fact, there’s some debate even amongst the experts as to what terms should be used and when!
The four phrases you are likely to hear are Selective Laser Sintering (SLS), Direct Metal Laser Sintering (DMLS), Selective Laser Melting (SLM) and Lasercusing.
SLS and DMLS and essentially the same process; both involve sintering rather than full melting. The only difference between the two is that SLS is normally used to describe the process when used for other materials such as plastics, nylons and ceramics while DMLS is used exclusively for metal. SLM is fairly straightforward and used only when the powder is being melted rather than sintered.
Diagram of direct metal laser sintering process
Finally, laser cusing is fundamentally a brand name for SLM. There are some fairly trivial differences but the core concept is the same. Whatever your needs in selective Laser sintering we are here to help, call us on 01489 779 696 or complete our enquiry form here to discuss your requirements.
If you enjoyed reading this article, why not register for future articles?