|Laser||Power Demand||M²||Beam Ø||Scanner/Lens||Energy|
|redENERGY G4 20W EP-Z||20W||<1.6||60μm||10mm/254mm FL||WF10 90kHz @ 50mm/s|
Titanium is used within the aerospace, medical and jewellery industries due to the material being lightweight, strong and highly resistant to corrosion. Colour marking of titanium is most commonly used in jewellery applications, as using a laser allows for a permanent mark which is biocompatible and can also mark three-dimensional surfaces.
The challenge with titanium marking is to generate a high contrast mark whilst causing minimal thermal damage to the surrounding surface and also achieve a wide colour spectrum.
By controlling pulse duration, with variations of high frequency and low scanning speed, the user is able to achieve high quality colour marking. Thermal management defines the colour of the mark on the material, and varying the pulse frequency defines the intensity and contrast of the colour.
Depending on the grade of titanium, certain shades of red (magenta) and blue (cyan) are very easy to mark with very high quality.
REGISTER FOR UPDATES
If you enjoyed reading this article, why not register for future articles?