|Laser||Power Demand||M²||Beam Ø||Scanner/Lens||Energy|
|redENERGY G4 40W HS-H||40W||1.8||8mm||10mm aperture / 254mm F- theta||WF2 0.06mJ @500kHz|
The use of anodised material is widely used across many industries, as the colours offered by the anodising process are almost unlimited. The coloured anodised layer is only a few microns on the surface of the aluminium substrate.
Using our redENERGY Pulsed Fiber Lasers this coloured layer can be removed to reveal the underlying aluminium. For this application a broad energy distribution in the beam as offered by our H-type higher moded Lasers allows rapid processing of these parts with a capability for removal rates up to several cm”/s. This process benefits from the high repetition rates and the control of the pulse duration offered by our HS functionality.
REGISTER FOR UPDATES
If you enjoyed reading this article, why not register for future articles?