|Laser||Power Demand||M²||Beam Ø||Scanner/Lens||Energy|
|redENERGY G4 20W RM-Z||20W||<1.6||5.5mm||5.5mm/254mm FL-F Theta||WF1 95kHz @ 6000 mm/s|
ABS is widely used for consumer goods as it possesses high impact and mechanical strength, which allows products manufactured in ABS to be long-lasting and durable. Control panels, smoke alarms and extractor fans are a few examples of where ABS is used.
The challenges which may arise in this application are from generating a dark mark of high contrast whilst minimising the risk of material burning.
Our redENERGY G4 RM-Z Laser can generate a high quality mark and avoid the effects of material burning. This application is capable of multiple passes, with a darker mark being achieved after a second pass resulting in uniform coloration.
Process time for the 5mm characters shown in the above image were created at 6.4s. Alternatively, a 30W RM-Z at three passes would increase the cycle time to 8.7s but will give improved contrast with negligible blistering of the surface.
REGISTER FOR UPDATES
If you enjoyed reading this article, why not register for future articles?