Sub 2mm Metal Cutting with a CW-M Laser

There are many industrial applications of Laser profile cutting sub 2mm sheet metal parts, and this technology is widely used in industries such as automotive, electronics, and general manufacturing.

This application insight looks in to sub 2mm cutting of metals with a 400W CW/M Fiber Laser, focusing on aluminium, mild steel and stainless steel. It includes detailed results of cutting speeds, as well as examples of cut edge profiles for all three metal types.  It explores the many features and benefits of the 400W CW/M Laser looking at how it compares to other technologies, giving details to why an SPI Fiber Laser is the ideal solution, bringing proven technology into high volume, low cost applications.

Share article on...
Sub 2mm Metal Cutting with a CW-M Laser

Introduction

Examples of the typical sub 2mm cutting applications are shown in figure 1. In a typical job shop, sub 2mm sheet metal can account for between 30%-80% of the material flow.

Fiber Lasers have a proven track record in high volume production environments, succeeding in high quality, low cost applications and so this type of Laser is therefore ideally suited to this cutting application.

CW/M Lasers Features and Benefits

Our Fiber Lasers bring many benefits to this type of application as outlined in the table below. Given the appropriate workstation, industrial Fiber Lasers can process flat sheet, formed components and tube materials and therefore are a very flexible process tool. In addition, Fiber Lasers feature a low maintenance Laser architecture and high wall-plug efficiency leading to lower production costs.

FeaturesBenefits
Smaller focal spot sizeMore efficient cutting.

Faster on thin materials

Able to make high quality surface marks

Compressed air assist gasSignificantly lower operating costs
Small footprintMore compact system
Low periodic maintenanceLess downtime
Optical fiber beam deliveryBeam delivery does not need

re-alignment and has low maintenance requirement. Capability to mount on a robot

Common line cutting and tight nestingEfficient use of sheet material
4x more energy efficient than a CO2 LaserLower running costs
No process

consumables / wearables

Enables lights out operation
Fig. 1. Some examples of typical industrial sub 2mm cutting applications.

Fig. 1. Some examples of typical industrial sub 2mm cutting applications.

REGISTER FOR UPDATES

If you enjoyed reading this article, why not register for future articles?

arrow