|Laser||Power Demand||M²||Beam Ø||Scanner/Lens||Energy|
|redENERGY G4 20W EP-L||20W||1.6||8mm||10mm/163mm F- theta||WF0 0.8mJ @25kHz|
Our Pulsed Fiber Lasers can be used for a variety of micro cutting applications. The high peak power and short pulses of these Lasers ensure that there is good coupling and material removal for a range of metallic (including highly reflective and conductive metals such as gold, silver and copper) as well as non metallic materials. Using this technique very thin metal foils can be cut in a single pass. Thicker Metals up to 0.5mm and more, can readily be cut with multiple passes.
The process uses a fast scanner based beam delivery with a short focal length F-Theta lens and so requires no processing gas. As the mechanism is predominantly through vaporisation there is minimal recast material and very limited heat affected zones. The high precision offered by today’s scanner based systems mean that part accuracies in the order of 10microns can be achieved over fields exceeding 150mm square.
To see our 1.5kW redPOWER PRISM Cutting 1mm Copper click HERE
REGISTER FOR UPDATES
If you enjoyed reading this article, why not register for future articles?